Toshiba DK40I 用户手册
E911
Program *11-0 – E911/CAMA Trunk Assignments
8-4
Strata DK Programming 5/00
Program *11-0 – E911/CAMA Trunk Assignments
Processor Type:
DK40i, all RCTUs and BCUs (Release 4.3)
Program Type:
System
Initialized Default:
All LEDs Off
Program *11-0 Overview
This program enables E911 calls to be analyzed by the system for appropriate handling. The
following assignments in Program *11-0 must be enabled to allow Enhanced 911 (E911) CAMA
trunks to operate:
following assignments in Program *11-0 must be enabled to allow Enhanced 911 (E911) CAMA
trunks to operate:
LED 11: CAMA Operation Enabled/Disabled
Led 11 must be turned On to enable the E911 feature to operate.
LED 10~07: CAMA Trunk Circuits Enabled/Disabled
Up to four CAMA (RMCU/RCMS) trunks can be installed on Release 4.0 DK424 and DK424i
systems. Turn LEDs 07-10 On to enable the appropriate CAMA trunks (1-4). RMCU/RCMS
CAMA trunk circuit are numbered 1~4 from the bottom-up (see the front of the installed RMCU/
RCMS). If only one RCMS is to be installed, place it on the bottom position of the RCMU. The
Universal Slot PCB and Universal PCB Wiring chapters of the Strata DK Installation and
Maintenance Manual provides details regarding RMCU/RCMS PCB installation and circuit
numbering.
systems. Turn LEDs 07-10 On to enable the appropriate CAMA trunks (1-4). RMCU/RCMS
CAMA trunk circuit are numbered 1~4 from the bottom-up (see the front of the installed RMCU/
RCMS). If only one RCMS is to be installed, place it on the bottom position of the RCMU. The
Universal Slot PCB and Universal PCB Wiring chapters of the Strata DK Installation and
Maintenance Manual provides details regarding RMCU/RCMS PCB installation and circuit
numbering.
LED 03: Internal Notification of E911 Calls Enabled/Disabled
To allow Attendant consoles and station DNs to be called along with the E911 CAMA trunk when
a 911 call is made, LED 03 must be turned Off. With this feature enabled, E911 calls will ring the
CAMA trunk plus the Incoming Emergency (
a 911 call is made, LED 03 must be turned Off. With this feature enabled, E911 calls will ring the
CAMA trunk plus the Incoming Emergency (
,1(UPJ
) button on all Attendant consoles and the
[DN] button ([PDN] or [PhDN]) designated in Program *11-8. The designated DN must be
programmed to ring telephones in *71, *72, and *73, as required for each telephone on which the
designated [DN]appears.
programmed to ring telephones in *71, *72, and *73, as required for each telephone on which the
designated [DN]appears.
✱ ✱ ✱ ✱ 6SNU ✱ +ROG 6SNU
+ROG 6SNU +ROG 6SNU +ROG
LED/Button
X
LED On
LED Off
11
E911 enabled
E911 disabled
10
CAMA trunk 4 not used
CAMA trunk 4 used
09
CAMA trunk 3 not used
CAMA trunk 3 used
08
CAMA trunk 2 not used
CAMA trunk 2 used
07
CAMA trunk 1 not used
CAMA trunk 1 used
06
05
04
03
No internal notification
Internal notification provided
02
CAMA trunk Control Disconnect
Normal disconnect
01
Seven CESID Digits
Ten CESID Digits
Light the LED Buttons that are
marked with an X in the table below.
marked with an X in the table below.
On=Enabled. Off=Disabled.
SELECT = 0