Toshiba DK40I 用户手册

下载
页码 424
E911
Program *12 – CESID Station Information
Strata DK Programming     5/00
8-11
E91
1
Program *12 – CESID Station Information
Processor Type:
DK40i, all RCTUs and BCUs (Release 4.3)
Program Type:
System
Initialized Default:
Data Blank
Program *12 Overview
This program assigns the Caller Emergency Service Identification (CESID) information that will 
be sent to the CAMA trunk using Multi-Frequency (MF) signals.
When a station dials 911, the E911 feature causes the DK to seize the CAMA trunk and send 911, 
11 or 1 (per Program *11-5) plus the station’s unique CESID information entered in this program. 
This CESID information is also sent to the displays of internal notification consoles and stations. 
The CESID information can be 7 or 10-digits maximum (per Program *11-0, LED 01). Note that 
the digits sent on the CAMA trunk are MF tones, so they cannot be checked with a DTMF test set.
The digits entered in this program for each station is normally a unique telephone number for each 
station or station location (i.e., office, room, building, etc.). The exact CESID digit format required 
✱  ✱  ✱ ✱  6SNU ✱   +ROG  6SNU
;  ; +ROG  6SNU   +ROG  6SNU   +ROG
Processor
Port Range
Processor
Port Range
DK14
000~009
B1CU
000~055
DK40i
000~027
B2CAU/BU
000~111
RCTUA
000~031
B3CAU/BU
000~191
RCTUBA/BB
000~079
B5CAU/BU
000~335
RCTUC/D
000~239
RCTUE/F
000~335
Port
Location CESID 
Digits
Port
Location CESID 
Digits
Port
Location CESID 
Digits
Port
Location CESID 
Digits
X = Location CESID digits to send on 
CAMA trunk when station dials 911 
(0~10 digits max.) See Program *11, 
LED 01 for 7 or 10 digits.
Station Port Number (see legend)