Toshiba DP5000 用户手册
Headset and Handset Operation
AUTO or CARBON Setting
78
Strata CIX DP5000-series Telephone UG 11/07
AUTO or CARBON Setting
There exist two types of headsets: ECM and Carbon. The default setting on the
telephones is AUTO. When the headset is connected to the Headset Modular
Connector of the telephone, the AUTO setting enables the headset I/F current detector
to determine which headset type is connected (EMC or Carbon). If the current is
marginal using a carbon headset (only) and performance is not good, change the
setting to CARBON.
telephones is AUTO. When the headset is connected to the Headset Modular
Connector of the telephone, the AUTO setting enables the headset I/F current detector
to determine which headset type is connected (EMC or Carbon). If the current is
marginal using a carbon headset (only) and performance is not good, change the
setting to CARBON.
³ To change the setting from Auto to Carbon
Telephones: All except the Single Line Telephone
1. Press
3+6+9+Hold
(simultaneously).
2. Press
Spdial
.
3. Press
FB3
to toggle On/Off.
FB3, LED On: CARBON
FB3, LED Off: AUTO (default)
4. Press
Hold
to set the option.
5. Go off-hook, then on-hook to exit the program mode.
Telephones: Single Line Telephone
1. Press
3+6+9+Hold
(simultaneously).
2. Press
Spdial
and press
3
.
3. Press
Msg
to toggle On/Off.
Msg LED On: CARBON
Msg LED Off: AUTO (default)
4. Press
Hold
to set the option.
5. Go off-hook, then on-hook to exit the program mode.