Toshiba DKT2510-FS 用户手册

You can transfer internal or outside calls to an idle station from either a DSS console or a DADM.

➤

You can transfer a call to a busy station from either a DSS console or an DADM. Use the [DSS] to 
transfer the call, even though the [DSS] LED associated with the station you are “transferring to” is 
red.

1. Press [DSS] corresponding to 

the station to be called.

The call is placed automatically on hold. The Line or [DN] 
LED flashes green at double the on-hold rate, and the [DSS] 
LED flashes green.

You hear a single-ring tone. (If using the Tone signalling 
mode, you hear successive ring tones.)

2. Announce the call.

With Tone signalling, you would have to wait for the called 
station to answer before announcing the call.

3. Hang up.

The call rings the called station when you hang up. While the 
called station is ringing, the [DSS] LED is steady red, and the 
Line LED flashes green at the on-hold rate or if on a [DN] 
button, it goes idle. 

When the called station answers the call, the [DSS] LED stays 
steady red, and the Line LED becomes steady red.

4. If the station does not answer 

before a period set in system 
programming, the call recalls 
your station.