Toshiba DK Backup 用户手册
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Security Maintenance Section
77
Administration Menu (DKAdmin)
Security Maintenance Section
The Security Maintenance Section option (level 9 password required to access this option)
enables you to set up to three levels of security using:
enables you to set up to three levels of security using:
♦
Passwords - defines the functions available to users using menu-specific passwords as
described on
described on
Page 121
.
♦
Program Access - defines the programs which can be used by each password level using
the Security Maintenance Section option (see
the Security Maintenance Section option (see
“Program Security (Default Levels)”
on
Page 78
).
♦
DK Access Code - must be entered to enable a user to send and/or receive data to/from a
Strata DK. The default for this code is 0000 and may be changed (but not viewed) by
DKAdmin users that have an allowable password level.
Strata DK. The default for this code is 0000 and may be changed (but not viewed) by
DKAdmin users that have an allowable password level.
➤
To limit the Strata DK programs a user may edit
1. From the
Administration Menu,
type
type
u
to display the
DK Program Security
Maintenance screen
(shown right).
Maintenance screen
(shown right).
The screen lists the
Strata DK programs
available for
programming or
updating. You can
limit programs a user
can access by
assigning a security
level (which corresponds to the users assigned password level).
Strata DK programs
available for
programming or
updating. You can
limit programs a user
can access by
assigning a security
level (which corresponds to the users assigned password level).
Note
Program access security limits direct access of programs when using the Program
Administration Section Option. When using the ACD Administration Section Option,
only Programs 01, 02, 04,
Administration Section Option. When using the ACD Administration Section Option,
only Programs 01, 02, 04,
*
09, VMID, MWID, and Personal Speed Dial access can be
denied from the normal System/Station Administration functions.
2. Highlight the S/L field of the desired program. Type the password level (
0
~
9,
9
=highest) you want to assign for accessing the program and press
Enter
.
Note
For a complete list of Password/Program default levels, see
“Program Security
(Default Levels)”
on
Page 78
.
...or
to assign all the programs to a particular password level, press
F2
-reset. A Security Level
dialog box displays. Type the password level (
0
~
9,
9
=highest) you want to assign to all
the Strata DK programs and press
Enter
. A confirmation message displays. Highlight
Yes
and press
Enter
.
The Security Level for all programs are changed to the entered password level.
3. To close the DK Program Security Maintenance screen, press
Esc
.