Toshiba DKT2001 用户手册

When the called station answers the call, the DSS LED stays steady red, and the 
Line LED becomes steady red.

4. If the station does not answer before a period set in system programming, the call 

recalls your station.

You can transfer a call to a busy station from a DSS console. Use the DSS to transfer 
the call, even though the DSS LED associated with the station you are “transferring 
to” is red.

➤

1. Press DSS corresponding to the busy station to be called.

You may hear a busy tone. The original caller is placed automatically on hold. The 
Line LED flashes at double the on-hold rate, and the DSS LED remains steady red.

2. Hang up.

The call rings the called station once with the camp-on tone. While the called 
station is receiving this tone, the Line LED flashes green (on-hold rate) or if you 
are on a extension button, it goes idle. The DSS LED remains steady red.

When the called station answers the transferred call, the Line LED becomes steady 
red. The DSS LED remains steady red. 

If the busy station is in the Do Not Disturb mode, the call will not transfer, but 
will recall your telephone immediately.

If the call is not answered after a specified Recall time set in system programming, 
camp-on is cancelled and the transferred call rings back.

If your DSS console is equipped with a 

/LQH

 button, you can answer outside line calls 

from the DSS console as you would from a digital telephone.

➤

➤

Press the flashing 

/LQH

.