Panasonic 524X07801B 用户手册
244
DBS 576 (USA), Revised 6/11/98
576-13-700
Chapter 6. DSLT Features
Section 700 - Operation
Direct Trunk Access
Extensions can seize a specific trunk for outgoing calls. Extensions can also use Direct Trunk Access
to test trunks or to access data trunks.
to test trunks or to access data trunks.
Operation
To use Direct Trunk Access:
Hardware Requirements
•
N/A
Related Programming
•
FF1-0-03: Extension COS (Direct Trunk Access)
•
FF3: Extension COS
Considerations
•
N/A
MCO Trunk Access
The System supports up to 5 MCO groups for each MCO tenant group. You can seize an idle trunk
from the MCO trunk group by entering the MCO access code.
from the MCO trunk group by entering the MCO access code.
Operation
To seize an idle trunk:
Hardware Requirements
•
N/A
Related Programming
•
FF1: MCO Access
Action
Result
1. Lift the handset or press the ON/OFF key.
2. Enter the Direct Trunk Access code (default = 88).
3. Enter the desired trunk number.
Outside dial tone
4. Dial the phone number.
Action
Result
1. Lift the handset or press the ON/OFF key.
Intercom dial tone
2. Enter the desired trunk access number (9 or 81-84). (See
Outside dial tone
3. Dial the phone number.