GE 5983 用户手册

4

Unit beeps

• Place the handset in the cradle for 0 seconds. If it still beeps, charge battery for 

16 

hours.

• Clean charging contacts on cordless handset and charge cradle with a soft cloth 

or an eraser.

• Replace the battery.

Memory Dialing doesn’t work

• Did you program the memory location keys correctly?
• Did you follow proper dialing sequence? 

Unit locks up and no communication between the base and cordless handset

• Unplug the AC power adaptor from the wall outlet and the back of the base. 

Remove the handset battery. Wait for 30 seconds and plug the power adaptor 

back into the base and wall outlet. Reconnect the battery and charge for 16 hours.

No Display

• Is battery fully charged? Try replacing the battery.
• Make sure that the unit is connected to a non-switched electrical outlet. 

Disconnect the AC power adaptor from the base and reconnect it. 

Caller ID Error Message

• The unit displays this message if it detects anything other than valid Caller ID 

information during the silent period after the first ring. This message indicates 

the presence of noise on the line. 

No Caller ID

• In order to receive Caller ID information, you must subscribe to the standard 

name/number Caller ID service from your local telephone company.

If you experience any of the following problems, even after fully recharging the 

battery, you may need to replace the battery pack:

• Short talk time
• Poor sound quality
• Limited range