Seiko Group 7500 UB 用户手册

Setting Up the Projector

To install the projector, you first need to determine the location, based on the size of your 
screen (maximum diagonal image size). Use the table on page 15 as a guide to positioning the 
projector. 

To suspend the projector from a ceiling, you will need the optional projector mount designed 
for the projector. See page 11 for ordering information. Follow the instructions included with 
the mount to install the projector.

Warning: When installing or adjusting the ceiling mount, do not use adhesives to prevent the 
screws from loosening and do not use any type of oil or lubricant. These may cause the projector 
casing to crack and the projector may fall, causing serious injury and serious damage to the 
projector.

If you install the projector on the ceiling, you will need to invert the picture so that it appears 
right side up. Follow these steps:

1. Press the 

Menu

 button on the remote control.

2. Open the 

Settings

 menu, then select 

Projection

.

3. Select 

Front/Ceiling

.

4. Press the 

Menu 

button when done.

Note that you can rotate the Epson logo plate 
180 degrees when suspending the projector from a 
ceiling.

If you are planning to use an AV controller with the 
projector, refer to the table of ESC/VP21 command 
codes on page 69.