Fujitsu Siemens Computers LOOX 400 用户手册

 

Troubleshooting and tips 

A26391-K150-Z120-1-7619, Edition 3

 

53 

If the Pocket PC stops working, this may have the following reasons: 

An application programme has caused the malfunction 
► 

Restart the Pocket PC (see the section "Switching on and off with soft reset (warm boot)"). 

or 
► 

If the restart does not function, reset the Pocket PC to the delivered state (see the section 
"Resetting Pocket PC to delivered state"). 

 

 

When you reset the Pocket PC to the delivered state, your data are lost! 
Therefore, remember to make a regular data backup with synchronisation (see 
"Synchronising data with ActiveSync" section) or on corresponding memory cards 
(available as an accessory). The program FSC-Backup is provided on your Pocket PC for 
completely backing up the RAM memory. 

The battery is dead 
► 

Connect the PSC11R-050 power adapter to the Pocket PC to charge the battery. 

Or 
► 

Connect the PSC11R-050 power adapter to the cradle and place the Pocket PC in the cradle 
for charging. 

The battery is either too hot or too cold.  
► 

Bring the Pocket PC up / down to a normal temperature again. 

If the operating time of the battery mode is extremely short, the battery is probably old and should 
be replaced. Please contact your dealer for a new battery. 

You have pressed and held the Suspend/Resume button too long to switch the Pocket PC on 
or off. 
► 

Briefly press the Suspend/Resume button until the Pocket PC switches on or off.