Sterling 882.00249.00 用户手册

2–Pump 12-Station Controllers 

Chapter 3:  Installation 

24 

TO SELECT A STATION

PRESS STATION <1-12>

 

ALARM 11: ENABLED

 Y=ENABLE N=DISABLE 

 

Each station has its own No Convey alarm settings. You can enable or disable alarms as 
needed. If a station doesn’t receive (or dump) material after a user definable number of load 
attempts, the controller activates an alarm condition. Perform the following procedure to set 
alarm conditions. 

To alter the Input Delay time: 

•  Press the YES key. 

The following screen displays. 

 

 
 
 
 
 
 
 

To alter stations alarm settings: 

•  Select a station to alter, then press the related Station STnn key. nn is the station 

number you selected. 

The screen displays the selected station (11 in the following example) and the current 
station alarm setting. 

 

 
 
 
 
 
 
 

 

To enable the alarm: 

•  Press the YES key. 

The alarm is enabled on the station you selected. 

If you want to disable the alarm: 

•  Press the NO key. 

The alarm is disabled on the station you selected. 

The controller increments to the next station in sequence. 

To retain the original setting: 

•  Press the SET key. 

The next station in the sequence displays.