Sterling 882.00249.00 用户手册
2–Pump 12-Station Controllers
Chapter 3: Installation
27
PUMP SETTINGS?
NO/YES
PUMP MODE?
NO/YES
SET PUMP MODE?
Y=SINGLE N=DUAL
Pump Settings Menu
The Pump Settings menu lets you set all pump parameters. These include:
The Pump Settings menu lets you set all pump parameters. These include:
• Pump Mode
• Blowback
• Delay Time
• Blowback
• Delay Time
Setting the Pump Mode
The first setting to be configured is the Pump mode. This function tells the controller how
many pumps are connected to the system and how the pumps are to be controlled.
many pumps are connected to the system and how the pumps are to be controlled.
You can select two pump modes: Single Pump mode and Dual Pump mode. In Single Pump
mode (default), one (1) pump is used to convey material to all 12 stations. In Dual Pump
mode, two (2) pumps are used simultaneously, resulting in a more efficient conveying
process.
mode (default), one (1) pump is used to convey material to all 12 stations. In Dual Pump
mode, two (2) pumps are used simultaneously, resulting in a more efficient conveying
process.
From the main operating display (OFFLINE):
1. Press the MENU key repeatedly until the screen displays the following:
To enter the Pump Settings menu:
1. Press the YES key.
2. Press the NO or MENU key repeatedly until the screen displays the following:
To enter the Pump Mode setting menu:
1. Press the YES key.
The screen displays the following: