Invacare 3002801 产品宣传页

下载
页码 1
DESCRIPTION
The lateral lock-out kit is used in environments where it is
not desirable to be able to quickly remove the lateral pads.
INSTALLING/REMOVING LATERAL
LOCK-OUT KIT (FIGURE 1)
Installing
1. Place the lateral pad in the mounting bracket and ad-
just if necessary. Refer to the Silhouette Owner's
Manual part number 1080355 for installation/adjustment
instructions.
2. Take the O-ring and push it over the quick-release but-
ton on the lateral mounting bracket so that the O-ring
fits entirely in the groove between the bracket and the
button.
Removing
1. To restore the quick-release functionality to the Silhou-
ette
®
 lateral, remove the O-ring with tweezers or a
paperclip.
Lateral Mounting
Bracket
O-ring
Quick-Release Button
 FIGURE 1 - INSTALLING/REMOVING LATERAL LOCK-OUT KIT
Silhouette
®
 Lateral Lock-out Kit
  Assembly, Installation and Operating Instructions
Kit Part No. 3002801
Invacare Corporation
www.invacare.com
USA
Canada
One Invacare Way
5970 Chedworth Way
Invacare is a registered trademark of Invacare Corporation.
Elyria, Ohio  USA
Mississauga, Ontario
©
 
1999 Invacare Corporation
44036-2125
L5R 3T9, Canada
800-333-6900
800-668-5324
Form No. 99-112 Part No. 0900103
Rev  (2) 11/99
SAVE THESE INSTRUCTIONS
NOTE: Check all parts for shipping damage before us-
ing.  In case of damage, do not use. Contact the dealer
for further instructions.
SAFETY  SUMMARY
The following reccommendations are made for safe
installation and use of the Silhouette Lateral Lock-
out Kit:
GENERAL WARNINGS
DO NOT install this equipment without first
reading and understanding this instruc-
tion sheet. If you are unable to under-
stand these Warnings, Cautions and In-
structions, contact a healthcare profes-
sional, dealer or technical personnel if
applicable before attempting to install
this equipment - otherwise, injury or dam-
age may occur.
Your therapist and physician should be
consulted if you have any questions re-
garding individual limitations and needs.