Precor 5.33 Benutzerhandbuch

Attach both stabilizers to the upright support 
bracket using eight hex head screws (D) and 
eight washers (E). Finger tighten.

Attach the lower portion of both stabilizers to the 
base frame using eight hex head screws (D) and 
eight washers (E). Wrench tighten.

Return to the upright support bracket. Wrench 
tighten the eight screws that secure the 
stabilizers to the bracket.

Secure the upright support. Wrench tighten the two 
screws holding the upright support onto the base.

Thread the hex nut and height 
adjuster into the base. Wrench 
tighten the nut.