Yamaha RX-A1030BL Benutzerhandbuch

PREPARATIONS

➤ Connecting speakers

En

■

When connecting an external power amplifier (pre-main amplifier) to enhance speaker 
output, connect the input jacks of the power amplifier to the PRE OUT jacks of the unit. 
The same channel signals are output from the PRE OUT jacks as from their 
corresponding SPEAKERS terminals.

1

Output front channel sounds.

2

Output surround channel sounds.

3

Output surround back channel sounds. When using only one surround back speaker, connect 
the external amplifier to the SINGLE jack (L side).

4

Outputs center channel sounds.

Connecting front speakers via an external power amplifier

We recommend using power amplifiers that meet the following conditions.

• With unbalanced inputs

• With volume control bypass (or without volume control circuit)

• Output power: about 100 W (6 to 8 

)

• To prevent the generation of loud noises or abnormal sounds, make sure the followings before making 

connections.

– Remove the power cable of the unit and turn off the external power amplifier before connecting them.

– When using the PRE OUT jacks, do not connect speakers to the corresponding SPEAKERS 

terminals.

– When using a pre-main amplifier that does not have the volume control bypass, turn up the volume of 

the pre-main amplifier enough and fix it. In this case, do not connect other devices (except the unit) to 
the pre-main amplifier.

1 2 3

4

The unit (rear)

L

R

L

R

The unit (rear)

PRE OUT (FRONT) jacks

Main input jack

Amplifier with 
volume control 
bypass 
(such as A-S2000)