Pfaff 1183 Benutzerhandbuch

Preparation

Fig. 9 - 02

.02

Winding the bobbin thread, adjusting the thread tension

● Place an empty bobbin 1 onto bobbin shaft 2.

● Thread the bobbin in accordance with Fig. 9-02 and wind it anti-clockwise around bobbin

1 a few times.

● Switch on the bobbin winder while at the same time pressing bobbin winder spindle 2

and lever 3.

The bobbin fi lls up during sewing.

If the machine is only being used to wind the bobbin (without sewing), a bobbin

case must be inserted in the hook! (Danger of damage to the hook).

● The tension of the thread on bobbin 1 can be adjusted with knurled screw 4.

● The bobbin winder stops automatically when bobbin 1 is full.

● Remove the fi lled bobbin 1 and cut the thread on knife 5.

If the thread is wound unevenly, loosen nut 6 and turn thread guide 7 accordin-

gly. Retighten nut 6 after the adjustment.