Bowflex 1000 Benutzerhandbuch

Assembly Manual

Basic Assembly Principles

Here are a few basic assembly tips that can make assembly of the Bowflex

TreadClimber

exercise machine quick and

easy.
1. Gather the pieces needed for each step prior to starting the step.
2. Turning towards the right tightens all the bolts and locknuts on your Bowflex

TreadClimber

. Turning towards the left,

loosens them.

3. All of the tools needed for assembly of your Bowflex

TreadClimber

exercise machine have been included. These tools

are only designed for one use. If damaged, substitute any commonly available 9/16” wrench and #2 screwdriver.

Note: A utility knife or scissors will be required during the unpacking and assembly process

(not included).

Select Your Workout Area

Select where you are going to put your Bowflex

TreadClimber

exercise machine carefully. The best place for your

TreadClimber

machine is on a hard, level surface. You will need at least 20 inches (0.5 meters) on each side and in front

of your TreadClimber

machine, and at least 36 inches (0.75 meters) behind it for dismount.

Make sure that the location you choose has a 10A power outlet within reach of the TreadClimber® machine power cord,

preferably to the right side of the machine where you will be less likely to step on the cord during dismount.

Note: The TreadClimber® machine is designed to plug into a grounded, non-GFI outlet only. To determine if your outlet or

circuit breaker is GFI, look for a test and reset button on them. If they have the test and reset button it is a GFI outlet

or circuit breaker.

Further, if you ever perform any repairs on your TreadClimber® machine that require you to lay it on its side, you will need

at least 60 inches (1.5m) to one side of your workout area.

Machine Mat

The Bowflex

TreadClimber

Machine Mat is an optional accessory for the TreadClimber

machine that helps keep

your workout area free from debris and dust. The rubber machine floor mat provides a non-slip surface when mounting

and dismounting the TreadClimber

machine, limits static discharge when you touch the machine, greatly reducing the

possibility of display or running errors. A rubberized mat will protect your flooring when you are performing repairs or

maintenance. Put your Bowflex

TreadClimber

Machine Mat in your selected workout area before begining assembly to

protect your floors and your TreadClimber

machine from damage.

Before You Assemble