Accusplit 980-312 Benutzerhandbuch

12-13

  •  The time stored in the memory can be recalled even while the stopwatch 
  is 

measuring.

1. Even if the digits are reset to “00”, stored times are not erased and can be 
  recalled by pressing “C” unless new measurement is started.

2. If the stopwatch is left untouched with the recalled times shown, the display 
  will automatically return the STOPWATCH display in 1 to 20 minutes.

  •  To measure the lap time and split time while the stored data are being  

 

    recalled operate the buttons as follows.

    Press “B” to measure new lap time and split time.
    Press “A” to stop the measurement.
    Press “D” to return to the measurement mode.

With each press of “C”

When the stopwatch is stopped

Split time and lap time are recalled
starting with the fi rst ones.

When the stopwatch is measuring

The times are recalled starting with 
the last ones.

Press “D” to show the STROKE/FREQUENCY MEASURING display.
Start the measurement by pressing “A” and stop the measurement by pressing 
“A” after the third stroke was made. The number of strokes per minute will be 
displayed.

STROKE/

FREQUENCY 

MEASURING 

mode

The number 

of strokes 

per minute 

(23.2)

14-15

1. During 1 second after the measurement has been started by pressing “A”, 
 fl ashing “180.0” is displayed. If the measurement is stopped by pressing 
  “A”  during this period, “Err” will appear. If the measurement is not stopped 
  by pressing “A” after more than 18 seconds have elapsed, “Err” will
  automatically appear. Therefore, note that measurable number of strokes 
  per minute is between 10 and 180.

2. If “B” is pressed while the measurement is stopped or “Err” is shown, the 
  digits will be reset “0.0”. Even if the digits are not reset to “0.0” with the 
  measurement stopped or “Err” shown on the display, the measurement 
  can be started by pressing “A”.

Error

See label on back of unit for details, or check 

http://support.ACCUSPLIT.com

REGISTER NOW 

Please return 

your AX602FY Registration to 
the Repair Center address in the 
warranty, and we will let you 
know about future products. 

Email (preferred)

User