Panasonic AW-RC600P Benutzerhandbuch

13

  Before proceeding with the connections, ensure that the power to all the devices is off.
  Be absolutely sure to use the AW-CA50A26 RCU cable to connect the RCU to the camera.
   When extending the cable, use the extension-use studio cable (WV-CA26U15, WV-CA26U30 or WV-CA26U100) and 

extension-use joint connector (WV-CA26T26).

   The maximum length to which the cable can be extended is 984 ft. (300 m) (for a camera body and lens). 

When using the studio card (AW-PB305) and attaching a viewfinder, it can be extended up to 328 ft. (100 m).

   When the power switch of the RCU is set to ON, the power indicator LED lights up, and the camera is controlled from the 

RCU.

Notes:
  When the R/G/B, Y/PR/PB and Y/C signals are used, select the required signals using the camera’s menu.
   When using the S-Video signals, select Y/C using the camera’s menu. Furthermore, use either the S-Video connector or 

BNC connectors, and leave the other connectors unconnected. 
The S-Video connector and BNC connectors cannot be used at the same time.

  Connect either the VIDEO OUT BNC connector or S-Video connector to the AW-SW350 live switcher.
  Use an intercom headset suited to all the devices.
  Fabricate the TALLY & INCOM cables without mixing up the signals.