Marantz RC3001 Benutzerhandbuch

z DC 

This jack connects to the supplied AC adapter.

x Antenna

This is a rod antenna for receiving RF signals.

c  IR blasters (upper direction)

These transmit IR signals. The Wizz.it 3 editor 
software can be used to turn transmission of the 
IR signals on and off.

v  IR blasters (front direction)

These transmit IR signals. The Wizz.it 3 editor 
software can be used to turn the IR signal 
transmissions on and off.

b  IR output jack

This jack connects the supplied IR emitter cable.

n Key 

These holes are used to mount the remote 
controller to a wall. For the mounting procedure, 
see  Mounting the RX3001 to a Wall  on page 8.

m  IR output level switches

These DIP switches set the IR transmission level 
from IR output jacks 1 to 3 and IR output jacks 
4 to 6.

,  Group ID selector switch

This switch sets the IR output group ID for IR 
output jacks 1 to 3 and IR output jacks 4 to 6.

.  CH selector switch

This switch sets the reception channel. Set to the 
same channel as the RC3001.

The CH selector has eight setting positions, but 
only four channel positions can be set.

⁄0 Power 

The red LED turns on when the AC adapter is 
connected. The red LED fl ashes when receiving 
signals.

v

c

⁄0

z

,

.

m

x

b

6

5

4

3

2

1

n

RC3001_E_01_ENG.indd   6

RC3001_E_01_ENG.indd   6

07.8.31   1:04:39 PM

07.8.31   1:04:39 PM