Samsung SIR-TS360 Benutzerhandbuch

41

CHAPTER 3

Setting up and connecting

2

Highlight the Set Dish menu item, then press the SELECT button. The Set Dish menu appears.

3

Highlight the Select Dish Type menu item, then press the SELECT button.

The Select Dish Type screen appears.

4

Use the right-arrow button on your remote control to highlight
the Dish Type option on the Select Dish Type screen.

5

Use the up- and down-arrow buttons on your remote control 
to display the dish type you are using (Round, Oval-2, Oval-3,
or No Dish). As you display each dish type, the on-screen 
pictures update showing you what each of these dish types 
look like. If you plan to use your DIRECTV

®

HD Receiver for 

local off-air or cable TV programs, but do not plan to receive 
DIRECTV

®

programming, select No Dish.

6

A message appears warning you that your DIRECTV

®

HD Receiver needs to reboot (turn itself

off and on) for the Dish Type setting to take effect. When you have displayed the correct dish 
type, use the right-arrow button on your remote control to highlight the on-screen SELECT 
button, then press the SELECT button.

7

To change the Dish Type to the new setting, highlight the 
on-screen SELECT button, then press the SELECT button. 
To leave the Dish Type setting unchanged, highlight the 
on-screen Cancel button, and press the SELECT button.

After you select the on-screen SELECT button, the DIRECTV

®

HD Receiver will reboot. 

If you selected No Dish, the DIRECTV

®

HD Receiver will perform an auto-scan to put your

cable and off-air channels into its memory so you can tune them and see them in the 
on-screen Guide.