Panasonic NV-DV2000EC Benutzerhandbuch
40
Notes:
¡ Although Assemble editing can be performed in LP
¡ Although Assemble editing can be performed in LP
mode, Insert, Audio Dubbing, and Audio Mixing
cannot be performed with a tape recorded in LP
mode. It is necessary to first copy the tape in SP
mode.
cannot be performed with a tape recorded in LP
mode. It is necessary to first copy the tape in SP
mode.
¡ In order to ensure that the editing operation is
performed properly, the editing points should be set at
least 20 seconds after the beginning of the tape.
least 20 seconds after the beginning of the tape.
¡ When using the Editing controller for remote control:
In order to conserve battery power, JOG/SHUTTLE
turns off after 30 seconds.
If JOG/SHUTTLE turns off after the edit start point
has been set on the recording unit (step 2), it is
necessary to press JOG/SHUTTLE again (so that it is
lit) before searching for the edit start point on the
playback unit.
If JOG/SHUTTLE turns off after the edit start point
has been determined on the playback unit (step 4), it
is necessary to press JOG/SHUTTLE again in order
to start editing.
turns off after 30 seconds.
If JOG/SHUTTLE turns off after the edit start point
has been set on the recording unit (step 2), it is
necessary to press JOG/SHUTTLE again (so that it is
lit) before searching for the edit start point on the
playback unit.
If JOG/SHUTTLE turns off after the edit start point
has been determined on the playback unit (step 4), it
is necessary to press JOG/SHUTTLE again in order
to start editing.
One-Touch Assemble
If the One-Touch Edit function is used, Assemble editing can be performed by controlling the playback unit through
the NV-DV2000.
the NV-DV2000.
Preparations
≥
≥
Confirm that the TV is on and the VCR viewing
channel is selected.
channel is selected.
≥
Complete necessary connections and settings.
[
[
R28–35]
≥
Set One-Touch-Edit to ON on Edit functions menu.
[
[
R37]
Operations
1
1
Press JOG/SHUTTLE on the Editing controller, and
check that the button is lit.
check that the button is lit.
2
Search for the edit start point on the recording
VCR.
VCR.
3
Press ¥ (REC).
≥
≥
The picture from the playback unit appears on the
screen.
screen.
4
Search for the edit start point on the playback unit.
5
Press JOG/SHUTTLE on Editing controller.
≥
≥
Editing begins.
≥
To continue editing, press JOG/SHUTTLE on the
Editing controller, and repeat steps 4–5.
Editing controller, and repeat steps 4–5.
6
Press ∫ (STOP) on the Editing controller to stop
editing.
editing.
DIGITAL VCR
1,5
2,4
6
3
Q
P