Panasonic J-HD1400P Benutzerhandbuch

47

*1 Displayed menus may vary depending on the settings in

menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).

“_____” indicates the factory setting.

For selecting the type of internal standard signals.
0000

A 100% color bar signal is selected.

A 75% color bar signal is selected.

An SMPTE color bar signal is selected.

An ARIB color bar signal is selected.

A black signal is selected.

For selecting how to process the serial input.
0000

The 8 higher bits whose two lower bits have been 
rounded off are recorded.

The dynamically rounded 8 higher bit signal is
recorded.

For setting whether to mute the video output signal 
when a blank part of the tape is detected during 
playback.
0000

The video output signal is not muted. (It is frozen.)

The video output signal is muted and turned gray.

The video output signal is muted and turned black.

The video output signal is muted and turned into 
noise.

For selecting the freeze mode of the still pictures and 
the slow play mode.
0000

Field freeze, field slow

Frame freeze, frame slow

<Note>
For IEEE 1394 digital output, if format conversion is 
not executed, the frames may freeze or slow down 
regardless of the settings in this item.

For selecting what signals are to be output from the 
VIDEO OUT1 output connector.
0000

The HD component signals are output.

Composite signals are output.

<Note>
When the CMPST is selected, the Pb and Pr of the 
analog HD component signals are muted.

This is used to select the method to process the 
images using the vertical filter during down-
conversion.
0000

The images are processed by field basis.

The images are processed by frame basis.

<Note>
When “FRAME” has been selected, the resolution is 
improved, but the images may flicker.

For setting the image processing during down-
conversion.
0000

Side cut mode

Letter-box mode

Squeeze mode

For setting the image processing during up-
conversion.
0000

Side panel mode

Top and bottom cut-off in vertical direction

Stretch mode

For enhancing the horizontal outlines during down-
conversion.
0000

For enhancing the vertical outlines during down-
conversion.
0000

For enhancing the horizontal outlines during up-
conversion.
0000

For enhancing the vertical outlines during up-
conversion.
0000

 >

For selecting the HD output signal format during 
1080i tape playback or in the 1080i EE mode.
0000

<Note>
This item’s setting cannot be changed while a tape is 
being recorded or while the recording pause mode is 
established.

>

For selecting the HD output signal format during 720p 
tape playback or in the 720p EE mode.
0000

<Note>
This item’s setting cannot be changed while a tape is 
being recorded or while the recording pause mode is 
established.

 >

For selecting the HD output signal format during SD 
tape (DVCPRO50, DVCPRO, DV or DVCAM) 
playback.
0000

Level adjustment mode for the component style

Level adjustment mode for the composite style