Panasonic AJ-D850P Benutzerhandbuch

– 63 –

301

IN/OUT

0000

MANU

DEL

0001

AUTO

302

NEGA

0000

OFF

FLASH

0001

ON

303

STD/

0000

AUTO

NON-STD

0001

STD

0002

N-STD

304

SERVO

0000

AUTO

REF

0001

EXT

305

EDIT

0000

N-DEF

RPLCE1

0001

CH1

0002

CH2

0003

CH1+2

306

EDIT

0000

N-DEF

RPLCE2

0001

CH1

0002

CH2

0003

CH1+2

307

EDIT

0000

N-DEF

RPLCEC

0001

CH1

0002

CH2

0003

CH1+2

The underline on the setting item denotes the initial setting.

This selects the operation to be performed when an edit point
has been set incorrectly (when the OUT point is before the IN
point).
0: Editing is not executed unless the illegal edit point is

cleared or set again properly.

1: The edit points already input are automatically cleared.

This selects whether to show a negative display when the IN
point is greater than the OUT point.
0: No negative display.
1: Negative display.

This selects STD or NON-STD in accordance with the
composite input signal.
0: Standard/non-standard signals are automatically identified

and processed.

1: Standard signals are processed. (Forced STD)
2: Non-standard signals are processed. (Forced NON-STD)

This selects the video signal processing.
0: Servo is synchronized with the input signal during recording

and editing, or with the REF signal during playback.

1: Servo is synchronized at all times with the REF signal.

This sets the channel assignments for the controller’s analog
audio preset when editing the digital audio of the VTR using a
controller which does not have a digital audio edit preset
control function.
This selects the channel concerned when the VTR CH1 edit
preset is set in compliance with the ON or OFF presetting for
the analog audio signals designated by the controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 or CH2 edit preset.

This selects the channel concerned when the VTR CH2 edit
preset is set in compliance with the ON or OFF presetting for
the analog audio signals designated by the controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 or CH2 edit preset.

This selects the channel concerned when the VTR CUE edit
preset is set in compliance with the ON or OFF presetting for
the analog audio signals designated by the editor or controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 or CH2 edit preset.