Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Panasonic
  4. AJ-HD130DCP
  5. Benutzerhandbuch

Panasonic AJ-HD130DCP Benutzerhandbuch

Download
Seite von 42
18
<Notes>
O
When  the  drop  frame  time  code  is  read,  the  colon
between  the  seconds  and  frames  changes  to  a
period.
O
If the time code signal is missing, it is automatically
compensated for by the CTL signal.
What is displayed is shown below.
T
2
R
00 : 07 : 04 : 24
In the case of a drop frame, the colon
between the seconds and frames changes
to a period.
Superimposed display
Time Code & User’s Bit
Setting the user’s bit
Set the VTR to the menu mode.
(By setting the LOCAL/MENU/REMOTE switch to
the MENU position.)
1
Select  the  setup  menu  item  No.531  (UB
PRESET) setting.
The  remaining  steps  are  the  same  as  for
setting the time code.
2
Time code/user’s bit playback
Set the VTR to the STOP mode.
1
Set TC or UB using the COUNTER button.
TC : The time code is displayed.
UB : The user’s bit is displayed.
O
When  the  time  code  can  no  longer  be  read,  it
is interpolated using the CTL signal.
2
Press the PLAY button.
Playback  is  started,  and  the  time  code  appears
on the display.
If  “ON”  has  been  selected  as  the  setup  menu
item  No.005  setting,  the  time  code  value  is
superimposed  onto  the  video  signals  which  are
output from the VIDEO OUT2 connector.
3
An asterisk (
2
) appears when
the time code signal is missing.
TC
00 : 07 : 04 : 24
UB
In the case of a drop frame, the colon
between the seconds and frames changes
to a period.
Counter display
The display flashes when the
time code signal is missing.