Philips SVA106 Benutzerhandbuch
Auto Satellite Link Using a Satellite Tuner 31
If you connect your VCR to a satellite tuner that has the Electronic
Program Guide, the VCR will turn itself on, record, then turn itself
off. First, read the owner’s manual of your satellite tuner; then, fol-
low the steps below. Before you begin:
Program Guide, the VCR will turn itself on, record, then turn itself
off. First, read the owner’s manual of your satellite tuner; then, fol-
low the steps below. Before you begin:
•
Use audio and video cables to connect the VCR’s AUDIO/VIDEO
IN jacks to the satellite tuner’s AUDIO/VIDEO OUT jacks.
•
Press the SPEED button to select the desired recording tape
speed (SP or SLP).
•
Set the clock. Details are on pages 14-15.
•
Put a tape in the VCR. Make sure the tape’s record tab is intact
and the tape is long enough to record the program(s).
• To stop an Auto Satellite Link
recording that is in progress, press
the STOP/EJECT button on the VCR.
the STOP/EJECT button on the VCR.
• If a program has copy guard pro-
tection, it may not record clearly.
• When you use this feature, the first
few seconds of a program may not
be recorded.
be recorded.
• If your satellite tuner synchronizes
the recording start time with the
broadcasting start time, refer to the
tuner’s owner’s manual.
broadcasting start time, refer to the
tuner’s owner’s manual.
• When you turn on the VCR power
before recording begins, the SATEL-
LITE LINK will be cancelled.
LITE LINK will be cancelled.
Helpful Hints
1
Set the program to be recorded on the satellite tuner. See
your satellite tuner owner’s manual for details.
your satellite tuner owner’s manual for details.
2
Press the MENU button repeatedly until the VCR SET UP
menu appears.
menu appears.
3
Press the PLAY button or the STOP button to select
SATELLITE LINK. Then, press the F.FWD button.
The current time appears next to “SATELLITE LINK.”
• If you want the VCR to begin recording immediately, or
SATELLITE LINK. Then, press the F.FWD button.
The current time appears next to “SATELLITE LINK.”
• If you want the VCR to begin recording immediately, or
as soon as a signal is received from the satellite tuner,
press the F.FWD button again, then go to step 6.
press the F.FWD button again, then go to step 6.
• If you want to tell the VCR the time to start recording, go
to step 4.
6
Press the F.FWD button. [ON] will appear briefly beside SATEL-
LITE LINK. Then, the VCR will turn itself off and the TIMER light will
appear on the display panel. The VCR will begin recording either
immediately or at the time you selected.
LITE LINK. Then, the VCR will turn itself off and the TIMER light will
appear on the display panel. The VCR will begin recording either
immediately or at the time you selected.
3
-
6
2
VCR/TV
POWER
EJECT
1
2
3
4
5
6
7
8
9
0
+100
CHANNEL
INDEX
SLOW
SPEED
QUICK-
FIND
TIME
EXIT
COUNTER
DISPLAY
MENU
RESET
MEMORY
REWIND
/ PLAY
F.FWD
RECORD
PAUSE/STILL
/ STOP
SEARCH
Set the program to be recorded
on the satellite tuner.
on the satellite tuner.
4
Press the PLAY button or the STOP button until the
desired hour (AM or PM) appears. Then, press the F.FWD
button.
desired hour (AM or PM) appears. Then, press the F.FWD
button.
5
Press the PLAY button or the STOP button until the
desired minute appears.
desired minute appears.
VCR SET UP
→
SATELLITE LINK
05:00PM
AUTO REPEAT
RENTAL
AUTO RETURN
AUDIO OUT
TV STEREO
RENTAL
AUTO RETURN
AUDIO OUT
TV STEREO
[ON]
SAP
VCR SET UP
→
SATELLITE LINK
05:30PM
AUTO REPEAT
RENTAL
AUTO RETURN
AUDIO OUT
TV STEREO
RENTAL
AUTO RETURN
AUDIO OUT
TV STEREO
[ON]
SAP
1