Optimus - Katadyn Products Inc. MODEL 110/MODEL 60 Benutzerhandbuch
24
Notes:
• If you leave the VCR in the freeze-frame
mode for 3 minutes, the VCR stops playing
the tape.
the tape.
• To reduce or eliminate jitter in the freeze-
frame picture, press and hold
CH
s/t until
the picture is clear.
Frame Advance
During freeze-frame, you can advance the pic-
ture one frame at a time by repeatedly pressing
ture one frame at a time by repeatedly pressing
SLOW
. This feature works best with video cas-
settes recorded at the SP or EP speed. Press
PAUSE
to return to normal playback.
Slow Motion
To start slow motion playback, while a tape is
playing, press
playing, press
SLOW
. Press
SLOW
again or
PLAY
to return to normal playback.
Notes:
• During slow motion, the sound is muted
and the picture quality is lower than during
normal playback. Slow motion picture qual-
ity is best with tapes recorded at the SP or
EP speed.
normal playback. Slow motion picture qual-
ity is best with tapes recorded at the SP or
EP speed.
• If you leave the VCR in the slow-motion
mode for 3 minutes, the VCR stops playing
the tape.
the tape.
• If the slow-motion picture is poor, press
and hold
CH
s/t until the picture improves.
One Minute Skip
You can skip over unwanted material on the re-
corded tape, such as commercials. Press
corded tape, such as commercials. Press
ZERO/1MIN
during playback. The VCR fast for-
wards over 1 minute of recording, then re-
sumes normal playback.
sumes normal playback.
REAL-TIME COUNTER
Using the Counter
Your VCR’s counter shows how long a tape
has been running. To display the counter on
the TV screen, press
has been running. To display the counter on
the TV screen, press
DISPLAY
on the remote
control.
Notes:
• The real-time counter might stop if you
fast-forward or rewind through a blank sec-
tion on the tape. This is normal.
tion on the tape. This is normal.
• You can press
COUNTER RESET
to reset
the counter to
0:00:00
.
Using the Zero Search Function
You can reset the counter to
0:00:00
at any
position on the tape and then return to that po-
sition.
sition.
Follow these steps to use the zero search func-
tion.
tion.
1. Press
COUNTER RESET
once so the
counter appears on the TV screen.
2. Within 5 seconds, press
COUNTER RESET
again at the location you want to return to
later. The counter resets to
later. The counter resets to
0:00:00
.
3. When you want to return to the selected
location, stop the tape, then press
ZERO/
1MIN
. The tape rewinds or fast-forwards
and automatically stops at the location you
selected in Step 2.
selected in Step 2.
16-547.fm Page 24 Tuesday, July 20, 1999 4:45 PM