Toshiba D-VR17KB Benutzerhandbuch

32

EN

This is a simple way to set the recording time in 
blocks of 30 minutes. Check that the disc you are 
recording onto has enough space remaining for the 
time you set.

Make sure that the TV input is set on the unit.

(See page 26.)

I

One-touch Timer Recording will start.

• When the unit reaches the specified time, it will 

be turned off automatically.

• To change the recording length during One-

touch Timer Recording, press [REC 

I

] 

repeatedly until the desired length appears.

• To cancel One-touch Timer Recording within the 

specified time, press [STOP 

S].

• The remaining recording time will appear on the TV 

screen during One-touch Timer Recording. Press 
[DISPLAY] to see it on the TV screen.

• The remaining recording time will be displayed on 

the front panel display during One-touch Timer 
Recording.

• Unlike the timer recording, you can perform the 

following operations during One-touch Timer 
Recording. 
- Turn off the power. (One-touch timer recording will 

be cancelled.)

- Use [REC 

I

] or [STOP 

S] on the remote control.

• You cannot use the pause function during One-

touch Timer Recording. 

• The unit will be turned off automatically under the 

following conditions.
- No space remains on the disc.
- If a power failure occurs.

• If DVD One-touch Timer Recording is completed 

during VCR playback or recording, the DVD will be 
in stop mode and the VCR keeps the current mode.

• When One-touch Timer Recording is finished and 

the power is turned off, the unit will switch to the 
timer-standby mode automatically if a timer 
recording has been programmed. Press 
[TIMER SET] to cancel the timer-standby mode to 
use the unit continuously.

• If you want to monitor the programme that you are 

recording, make sure the device such as a Satellite 
Box is powered off or press [DISPLAY]  when it is 
connected to AV2.

E9GA0BD_EN.book  Page 32  Monday, March 26, 2007  10:14 AM