Toshiba RD-XV48KE Benutzerhandbuch

Note

• When you record a TV programme from a Satellite

Box, you must connect a Scart cable to AV2
(DECODER). (See page 37.)

• When AV2 is connected, the signal from the AV2 will

be output automatically. If you want to monitor the
signal from other input, you must press [DISPLAY]
first. Then, select the desired input to monitor with
[INPUT SELECT

F].

Recording from a camcorder or other
Audio-Video equipment with no Scart output
socket (AV3/AV4)

Connect to AUDIO / VIDEO input jacks on the front
panel using an RCA Audio/Video cables.
When connecting a DV-camcorder, use DV input jack
of AV4 (Front).

Note

• When connecting an external device of monaural

output to this unit, use AUDIO L jack of AV3.

Digital Audio for Better Sound Quality

The connections illustrated above are
optional for better sound.

For clear digital sound quality, use
the DIGITAL AUDIO OUT (COAXIAL)
jack to connect your digital audio
equipment.

If the audio format of the digital output does not
match the capabilities of your receiver, the
receiver will produce a strong, distorted sound or
no sound at all.

Connecting a Dolby Digital™ decoder, DTS
decoder or MPEG decoder

• Connecting multi-channel Dolby Digital decoder

allows you to enjoy the Multi-channel Dolby Digital
surround system as well as DTS decoder, Multi-
channel surround system.

• After connecting to a Dolby Digital decoder, set

“Dolby Digital” to “Stream” in “Audio Out” menu.
(See pages 74 - 75.)

• After connecting to a DTS decoder, set “DTS” to

“ON” in “Audio Out” menu. (See pages 74 - 75.)

• After connecting to a MPEG decoder, set “MPEG” to

“Stream” in “Audio Out” menu. (See pages 74 - 75.)

Connecting to an MD deck or DAT deck

• The audio source recorded in Dolby Digital Multi-

channel surround format cannot be recorded using
an MD or DAT deck as a digital sound.