Sony SLV-SE810B Benutzerhandbuch

53

Recording TV programmes using the Dial Timer (SLV-SE810B only)

• To cancel a Dial Timer setting, press 

x (stop) on the VCR while you are making 

the setting.

• The programme is recorded in the current tape speed mode.  To change the tape 

speed, press SP/LP before you complete the setting in step 9.

• When you are recording a programme in the SP mode and the remaining tape 

becomes shorter than the recording time, the tape speed is automatically changed 
to the LP mode.  Note that some interference will appear on the picture at the point 
the tape speed is changed.  If you want to keep the same tape speed, set VITESSE 
AUTO. to NON in the OPTIONS-1 menu (page 84).

• To check, change, or cancel the programme setting, see “Checking/changing/

• If eight programmes have already been set using the ShowView system or the 

MINUTERIE menu, “FULL” appears in the display window for about five 
seconds.

• The 

 indicator flashes in the display window when you complete the setting in 

step 9 with no tape inserted.

• If you set the clock using the Auto Clock Set function and REGLAGE AUTO is set 

to OUI, the clock will adjust itself to the incoming time signal regardless of 
adjustments made with the Dial Timer.  Be sure you have set the Auto Clock Set 
correctly.

• The station name may not appear if the VCR does not receive station name 

information signals.

Turn   PROG so that “CLOCK” appears in the display window.

Press   PROG.
“DAY” appears in the display window.

Turn   PROG to set the day.

Press   PROG.
“MONTH” appears in the display window.

Turn and press   PROG to set the month, and then the year.  
After you set the year, “CLOCK” appears in the display window again.

Turn and press   PROG to set the hour and minute.

When you have finished setting the time, press   PROG to start the 
clock.