Sony HVR-M25E Benutzerhandbuch
Chapter 5 Adjusting and Setting Through Menus
Chapter 5 Adjusting and Setting Through Menus
69
Icon/Menu
Submenu
Setting
i.LINK SET
(pages 34, 54)
(pages 34, 54)
CROP
ADJUST
(page 41)
ADJUST
(page 41)
CROP
MARKER
(page 41)
MARKER
(page 41)
Adjusts the down conversion format. This menu is available when [HDV/DV SEL] is set to
[AUTO] or [HDV].
HDV
[AUTO] or [HDV].
HDV
t DV CONV
OFF :
Disables down conversion.
DVCAM :
Down converts to DVCAM format.
DV SP :
Down converts to DV SP format.
DOWN CONVERT
This setting is available when [HDV
This setting is available when [HDV
t DV CONV] is set to [DVCAM] or [DV SP].
SQUEEZE :
Plays back with compressed horizontal screen image and maintains all
images on display. Images appear vertically long.
images on display. Images appear vertically long.
EDGE CROP : Plays back with both left and right sides of the screen images cut off and
maintains the original image appearance.
Notes
• When [DVCAM] is selected, there are some limitations described below.
– ATN (Absolute Track Number) outputs the value counted in DVCAM format during
playback at regular speed (
×1) or recording of the internal color bars only.
During playback at irregular speeds other than described above, ATN outputs the value
of a tape recorded in HDV format.
of a tape recorded in HDV format.
– When the unit is playing back at regular speed (
×1) while detecting a blank portion on
the tape, the unit counts the blank portion as ATN-formatted in DVCAM.
– When using the duplicating function that is equipped with a device such as the DSR-25/
45/50, select [DVCAM].
– Please note that a duplicated tape and the source tape recorded in HDV format with
[DVCAM] selected do not share the same ATN (Time code value is displayed
correctly).
correctly).
• When you change the video format setting of [DOWN CONVERT] of [i.LINK SET] in [IN/
OUT REC] menu, the video signal output from COMPONENT OUT jacks, S VIDEO OUT
jack, or VIDEO OUT jack may be distorted for a moment.
jack, or VIDEO OUT jack may be distorted for a moment.
• Before changing your setting, be sure to disconnect the i.LINK cable. If you change the
setting while i.LINK is connected, the video device may not recognize the new setting.
• When you select [EDGE CROP], the outputs of S VIDEO and VIDEO are limited.
For details,
see page 85.
Adjusts the position of edge cropping when down converting 16:9 to 4:3 aspect ratio.
Adjusts the position of the crop marker by pressing
Adjusts the position of the crop marker by pressing
K/k buttons to move either left or
right, and press EXEC button to finish. (You can also use
J/j buttons.)
Selects whether to display EDGE CROP MARKER or not.
OFF :
Does not display the crop marker.
ON :
Displays the crop marker.
Notes
• This setting is only available, when [DOWN CONVERT] of [VIDEO OUT] or [i.LINK SET] in
[IN/OUT REC] menu is set to [EDGE CROP].
• EDGE CROP MARKER is displayed when HDV-formatted tape is played back. EDGE
CROP MARKER is also displayed when HDV signals are input to HDV/DV jacks.
IN/OUT REC
(Continued)