Sony SLV-X9D Benutzerhandbuch
98
Troubleshooting
P
lay
b
a
ck
The picture has no
sound.
sound.
• The tape is defective.
• If you made A/V connections, check the audio cable
• If you made A/V connections, check the audio cable
connection.
The sound is unstable or
has an echo.
has an echo.
• When you play a tape with the same sound recorded on
both the hi-fi and normal audio tracks, make sure MIX
AUDIO in the OPTIONS-1 menu is set to NON (see
page 90).
AUDIO in the OPTIONS-1 menu is set to NON (see
page 90).
The sound from a tape
recorded with the VCR is
not in stereo or the
STEREO indicator in the
display window is
flashing.
recorded with the VCR is
not in stereo or the
STEREO indicator in the
display window is
flashing.
• Adjust the tracking.
• The video heads are dirty. Clean the video heads using the
• The video heads are dirty. Clean the video heads using the
Sony T-25CLD, E-25CLDR, or T-25CLW video head
cleaning cassette as explained above.
cleaning cassette as explained above.
R
eco
rd
in
g
No TV programme
appears on the TV
screen.
appears on the TV
screen.
• Make sure the TV is set to the video channel. If you are
using a monitor, set it to video input.
• If your TV is connected to the VCR with both PERITEL
and aerial cables, make sure the RF channel is set to OFF
(see page 22).
(see page 22).
• Existing broadcasts may interfere with the VCR. Reset the
RF channel output of your VCR.
• Select the correct source with the CHOIX ENTREE button.
Select a programme position when recording TV
programmes; select a line input when recording from other
equipment.
programmes; select a line input when recording from other
equipment.
TV reception is poor.
• Make sure the aerial cable is connected securely.
• Adjust the TV aerial.
• Make sure NORME (L or B/G) in the REGLAGE DES
• Adjust the TV aerial.
• Make sure NORME (L or B/G) in the REGLAGE DES
CHAINES menu is set to the same system used in your
local area.
local area.
The tape starts playing as
soon as it is inserted.
soon as it is inserted.
• The safety tab has been removed. To record on this tape,
cover the tab hole (see page 55).
The tape is ejected when
you press z ENR.
you press z ENR.
• The safety tab has been removed. To record on this tape,
cover the tab hole (see page 55).
Nothing happens when
you press z ENR.
you press z ENR.
• Make sure the tape is not at its end.
Symptom
Remedy