Manualsbrain.com
  1. Handbücher
  2. Marken
  3. JVC
  4. HR-S5975EK
  5. Benutzerhandbuch

JVC HR-S5975EK Benutzerhandbuch

Download
Seite von 60
advanced features
39
Editing Using Another VCR
connect up
  Connect the player’s 21-pin SCART connector to the recorder’s
21-pin SCART connector as illustrated.
A
  When using your VCR as the player ...
... connect its 
L-1 IN/OUT
 connector to another VCR.
B  
When using your VCR as the recorder ...
... connect its 
L-2 IN/DECODER
 or 
L-1 IN/OUT
 connector to another VCR.
set vcr’s input mode
  The recording VCR mode must be set to 
AUX
. If this
VCR is the recorder, press 
AUX
 and/or
 PR
 to select 
L-1
 (if you’ve used the 
L-2 IN/
DECODER
 connector) or 
L-2
 (if you’ve used the 
L-1 IN/OUT
 connector). If this
VCR is the player, set 
O.S.D.
 to 
OFF
. (
墌 pg. 40)
set edit mode
  See Picture Control on page 29.
start source vcr
  Engage its 
PLAY
 mode.
start recording vcr
  Engage its 
RECORD
 mode.
NOTES:
• All necessary cables can be obtained from your dealer.
• For Y/C signal input/output, be sure to use a 21-pin SCART cable that is
compatible with the Y/C signal.
• When you set 
PICTURE CONTROL
 to 
EDIT 
to dub tapes (
墌 pg. 29), be sure to
select 
AUTO
 (or 
NORM
 when 
B.E.S.T. 
is set to 
OFF
) after you finish dubbing the
tapes.
HR-S5975/5977EK-EN/p27-40
3/6/04, 11:20 AM
39