A&D SW-15KS Benutzerhandbuch

13

 

8.2. Selecting a weighing unit 

 

In the weighing mode, press the    UNITS    switch to select a weighing unit. 
Each time the    UNITS    switch is pressed, the unit changes as shown below. 
 
 
 
 
 
 
 
 
Using the function setting “

Ut-g

”, “kg” and “g” can be switched. 

Ut-g 0

 : To display “kg”. 

Ut-g 1

 : To display “g”. 

 

Ut-g

only “kg” is displayed. 

 
 

8.3. Basic weighing operation 

 

1. Press the    ON/OFF    switch to turn the power ON. 

The unit used last before turning off appears. 

2. Select a weighing unit using the    UNITS    switch. 

3. When the display doesn’t show zero, press the 

  ZERO    switch to set the display to zero. 

4. When using a tare (container), place the 

container on the weighing pan, and press the 

  TARE    switch to set the display to zero. 

5. Place the object to be weighed on the weighing 

pan or in the container, and wait for the STABLE 
indicator to turn on and read the value. 

6. Remove the object from the weighing pan. 

‰

 The  ZERO  switch will zero the scale if the 

weight value is within ±2% of the weighing 
capacity (kg) around the power-on zero point. The 
ZERO

 

  indicator turns on.   

‰

 The   TARE   switch will tare the scale and subtract the weight to zero as a tare 

weight when the weight is a plus value. The NET    and ZERO    indicators turns 

on. 

(Note: In some countries or areas,  the ZERO    indicator will not turn on 

during the TARE operation.) 

‰

 Weighing is possible up to the weighing capacity. When a tare is used, weighing is 

possible up to the weighing capacity less the tare weight value. 

‰

 The  ZERO  and  TARE  switches function only when the weight values are 

stable. 

Ib

oz

Ib-oz

pcs

kg or g 

NET

ZERO

STABLE

NET

Object to

be weighed

Weighing pan 

Container 

Press