A&D AD-4405 Benutzerhandbuch

AD-4405 Weighing Indicator

Page

ENTER

key..............The key to register the unit weight and return to the piece

count display. The unit weight is calculated automatically

with the weight and the number of samples.

Press

the

ESC

key while pressing

+/-

key

The key to return to the piece count display without changing

the unit weight.

Notes

It is preferable to have a large number of samples, to minimize the

counting error.

Press the

ENTER

key after the STABLE mark turns on.

If the total weight of the samples is too light and is not adequate to be

used as the unit weight,

loUt

loUt is displayed for 2 seconds and returns

to the registration display.

Digital input

When the unit weight is already known, digital input is available.

Step 1 Start with the normal weight mode.

Step 2 Press the

SAMPLE

key to enter the digital input of the unit the weight. U xxx and

the weight unit is displayed with unit

pcs

pcs blinking. Using following keys:

key..................The key to set the unit weight. Maximum is 5 digits.

+/-

key .....................The key to select the weighing unit of the unit weight.

ZERO

key................The key to clear the digital input. U---- is displayed.

ESC

key ..................The key to return to the normal weight display without

changing the registered unit weight.

ENTER

key..............The key to register the unit weight and return to the normal

weight display.

Press

the

MODE

key while pressing the

+/-

key The key to shift the decimal point.

12. Counting Function