Toshiba EM1-31064JE Benutzerhandbuch

14-2

EM1-31064

14.1 WEIGHING OPERATION

Menu: REG., M. DOWN, or REWRAP
Mode: WEIGH

The weigh mode is used to weigh a commodity and to issue labels.  The label contains data such as a
weight, unit price (price per weight) and total price (calculated as a result of the weighing operation).
The following is a basic operation seen at the sales floor of a store or at a back room where different kinds
and weights of commodities are repacked.  Pressing the  VOID  key subtracts the last entry from the
memory.

Example) When PLU #100 and an unit price of $8.00 are set in the speed key #12.

1

100 g

1/4

1/2

0

0

PLU

PRT

*

The label is issued.

VOID

LB

kg

12

Enter the PLU #.

Press:

Press the
speed key.

The unit of measure can be changed
for CA model only.

LB 

↔

 kg

Available only when the initial
setting # 5-6 is set to 1.

kg scale

lb scale

Place a commodity
on the platter.
(Ex. 1.000 lb.)

MANUAL:

: AUTO

Press when canceling
the last sales.

NET  WT.

SELL   BY

PACKED  ON

PRICE   lb

(Sample label)

1. Pressing the speed key to which no PLU data has been assigned will result in an error.  In this case,

press the  C  key, then press the speed key to which PLU data has been assigned.

2. To change between AUTO and MANUAL, follow the procedure provided in section 14.9.
3. If a unit price exceeding 4 digits is obtained by multiplying by 2 or 4 (when pressing the

1/2

 lb  key or  1/4 lb  key), the unit price will be 0.

4. 100 g  key is available only when the scale is a kg scale or operated on kg base.
5. When the  1/2 lb ,  1/4 lb  or  100 g  key is pressed, the unit price will change on the display.
6. When the “compulsory tare” is selected, a tare must be subtracted in a weighing operation, otherwise

an error message “TARE REQUIRED” will be displayed when the following operation has been done:

1

Manual mode: Pressing the  PRT/*  key

2

Auto mode: Placing a commodity on the platter.

3

Floating vendor mode: Pressing the  Vendor  key.

When a “TARE REQUIRED” is displayed, refer to Section 14.6 to follow the proper weighing
procedure.

TEC STORE
(TEL) 0123-45-6789