Toshiba EM1-31064JE Benutzerhandbuch

16-1

EM1-31064

16.  ERROR MESSAGE TABLE

Take the following action if an error message appears on the commodity name display along with the
buzzer sounding.

DATA ENTRY ERROR

MEMORY FULL

DUPLICATE PLU

PLU NOT FOUND

CHARACTER
OVERRUN

PRT FAILURE
DETECTED

LABEL OVERRUN

RESTORE THE PLUS

Error in key input.

No memory space to set PLU.

The PLU # being changed is
already registered.

The PLU # being called is not
registered.

Attempt is made to set more
than max.  allowed number of
characters.

Printer trouble.

Label overruns.

The capacity of RAM was
changed with the ingredient
data stored.

Press the   CLEAR   key, and re-
input the right data.

Press the   CLEAR   key, and
delete unnecessary PLUs.

Press the   CLEAR   key, and
check the PLU.

Press the   CLEAR   key, and set
the data to free PLU#.

Press the   CLEAR   key, and re-
input the right data.

1. Check that the media and print

head are set correctly.

2. If the label home position is

misaligned, press the   FEED
key.

Press the   FEED   key.

Press the   CLEAR   key and save
the ingredient data.  Then delete
the data from the memory of the
unit.  After that change the capacity
of RAM and load the data to the
unit.

If you cannot solve the problem with the following solution instruction, do not attempt
further troubleshooting by yourself.  Turn the power off, unplug the scale, then contact
TOSHIBA TEC Authorized Service representative for assistance.
Do not attempt to repair or adjust alone, because electrical equipment is dangerous