A&D HW-100KV-WP Benutzerhandbuch
HV-WP/HW-WP Series
Page 37
13. Simple Batch Function
Caution
The parameters of the upper limit value (HI) and a final value (HI) use the
same memory. The parameters of the lower limit value (LO) and the zero band
(LO) use the same memory.
The upper/lower comparator function, the simple batch function and the
full/dribble batch function can not be used at the same time because these
parameters use common memory.
same memory. The parameters of the lower limit value (LO) and the zero band
(LO) use the same memory.
The upper/lower comparator function, the simple batch function and the
full/dribble batch function can not be used at the same time because these
parameters use common memory.
13.1.
13.1.
13.1.
13.1. Preparation (Setting Parameters)
Preparation (Setting Parameters)
Preparation (Setting Parameters)
Preparation (Setting Parameters)
Step 1 Turn off the display.
Press the
ON/OFF
switch while the
ZERO
switch is
pressed and held. The function table is displayed.
Step 2 Press the
ENTER
switch to display an item of the
comparator function (
f6
).
Step 3 Select a parameter of the simple batch function
(
f6 8
) with the
∧
switch.
Step 4 Press the
ENTER
switch to store the new parameter.
Step 5 Press the
F
switch and the
ENTER
switch to exit from
the function table. Then the scale displays the
weighing mode.