Toshiba EM1-31076 Benutzerhandbuch
10. PROGRAMMING PROCEDURES
10.14 IN-LINE/LOCAL
10-23
10.14 IN-LINE/LOCAL
Menu Page: 2
Item No.:
Item No.:
3
When the SL-9000 is used as a satellite in an in-line system, the “ID #” and “Transmission delay time”
can be set by the following procedure.
can be set by the following procedure.
NOTES:
1. The TMCC baud rate is fixed to 4800 BPS.
2. After setting the ID #, turn the power switch OFF and ON again.
3. This setting is not available in case that the Initial setting #13-6 is set to 1 (LAN: allowed).
1. The TMCC baud rate is fixed to 4800 BPS.
2. After setting the ID #, turn the power switch OFF and ON again.
3. This setting is not available in case that the Initial setting #13-6 is set to 1 (LAN: allowed).
■
Table 5: Transmission Delay Time Table
TR-Time (ms)
TR-Time (ms)
1
20 to 39
6
120 to 139
2
40 to 59
7
140 to 159
3
60 to 79
8
160 to 179
4
80 to 99
9
180 to 199
5
100 to 119
3
<MENU>
Page 2
PROG.
ESC.
<MENU>
Page 2
Main
<MENU>
l
ENTER
The transmission
delay time can be
set when in-line
system is selected
for TMCC.
delay time can be
set when in-line
system is selected
for TMCC.
(Refer to Table 5)
Select mode
TMCC
Set ID numbers
(Range: 0 to 255)
ENTER
OFF-line
l
◇
The default is 3.