Spectralink 8002 Benutzerhandbuch

SpectraLink 8002 Wireless Telephone Overview 

 

PN: 1725-36034-001_B.doc 

13 

Quick Start Guide 

1.  A wireless LAN must be properly configured and operational 

through the use of 802.11 wireless APs. Ensure WMM is enabled 
on the APs. 

2.  Configure a TFTP server on the LAN. The TFTP server is used to 

load the handset software and SIP configuration files into the 
handsets. See Chapter 2 SpectraLink 8002 Wireless Telephone 
Configuration for DHCP information.  

3.  The supported SIP system components must be connected to your 

network and completely operational.  

 to download the latest handset 

software and example SIP configuration files. 

5.  Ensure the handset software is properly loaded on the TFTP 

server that has been designated for the handset code. See Chapter 
3 Software License and Protocol Management, section Configuration 
Process. 

6.  Create/modify configuration files on the SIP TFTP server to 

define parameters for the SIP application. See Chapter 4 
Programming the SIP Handset Features, section SIP TFTP Server 
Configuration Files. The TFTP server may be the same one 
referenced in step 2 above. 

7.  Configure your handset per Chapter 2 SpectraLink 8002 Wireless 

Telephone Configuration. Ensure these configuration options are 
set: 

— 

Regulatory Domain 

— 

SIP Registration, Reg 1 and Login 

— 

IP Addresses: DHCP or static for each listed component, 
including SIP TFTP server and TFTP server. 

— 

Security 

— 

Preferred Channels 

VoIPon    www.voipon.co.uk    sales@voipon.co.uk    Tel: +44 (0)1245 808195     Fax: +44 (0)1245 808299