Siemens SL 740 Benutzerhandbuch

Connecting the base station to a PABX

SL 740 / Singapore / A31008-L740-S102-1-7619 / pabx.fm / 13.07.2004

Connecting the base station
to a PABX

The following settings are only necessary

if your PABX requires them, please refer to

the operating instructions for your PABX.
You cannot send or receive SMS/ MMS

messages on PABXs that do not support

Calling Line Identification.

Dialling modes and flash times

The current setting is marked with

‰.

1. Step: Changing the dialling mode

The following dialling modes can be

selected:
u Tone dialling (DTMF),
u DTMF earth (country-specific),
u Pulse dialling (DP).
v

Base

Add. Features

Dialling Mode

Select dialling mode and

press

(

‰ = on).

Long press (idle status).

2. Step: Setting the flash time

Base

Add. Features

Recall

Select flash time and press

(

‰ = on).

Long press (idle status).

Storing the access code
(outside line code)

Precondition: Your PABX may require you

to enter an access code before the

telephone number when making an

external call, e. g. "0".
v

Base

Add. Features

Access Code

Enter or change the access

code (maximum 3 digits) and

press the display key.

Save Entry

Select and press

Long press (idle status).

If you have stored an access code, the

following will apply:
u The access code is inserted

automatically when dialling from the

following lists: emergency numbers,

SMS service centre numbers, calls list.

u You have to add the access code

yourself during dialling and when

entering directory, emergency/call

director numbers and SMS service

centre numbers manually.

u If you use the telephone number from

the directory when sending a text

message, you have to delete the access

code.

u You can delete an access code with

To insert a pause, press

s Insert

Pause

s Insert Recall