Sony FS-1570 Benutzerhandbuch
1 OPERATIONAL OVERVIEW
1-5
1.8 Manual Entry of Position and Time
If there is no EPFS (Electronic Position-Fixing System) connected to this equipment or the
EPFS connected is not working (EPFS error indication appears), manually enter position
and time as follows:
1. At the DSC standby screen, press the [#/SETUP] key to display the Setup menu.
EPFS connected is not working (EPFS error indication appears), manually enter position
and time as follows:
1. At the DSC standby screen, press the [#/SETUP] key to display the Setup menu.
****
Setup menu
****
SCAN FREQ
VOLUME
TEST
SYSTEM
ALARM
AUTO ACK
ERASE
MESSAGE
POSITION
PRINT OUT
2. Rotate the [ENTER] knob to choose POSITION and then push the [ENTER] knob.
**
Position setup
**
INPUT TYPE: AUTO
LAT : 34
°
41 NORTH
LON : 135
°
30 EAST
TIME: 09: 00 UTC
3. Push the [ENTER] knob to open the INPUT TYPE menu.
**
Position setup
**
INPUT TYPE: AUTO
LAT : 34
°
41 NORTH
LON : 135
°
30 EAST
TIME: 09: 00 UTC
AUTO
N
N
MANUAL
Note 1: If, when INPUT TYPE is AUTO, input from the navigator is interrupted, the
message “EPFS error!” appears. If this occurs, check the navigator.
Note 2: When INPUT TYPE is MANUAL, the message “Warning: Update position”
appears at set intervals (update interval selected with POSITION OLDER on
the Alarm menu) to ask you to update position.
the Alarm menu) to ask you to update position.
4. Rotate the [ENTER] knob to choose MANUAL and then push the [ENTER] knob.
offered by Busse-Yachtshop.de email: info@busse-yachtshop.de