Sony FS-1570 Benutzerhandbuch
5 CALLING, RECEIVING
5-21
13. Rotate the [ENTER] knob to choose DSC frequency desired and then push the
[ENTER] knob. (See “How to set DSC frequency” on page 5-7 for details.) Your display
should now look something like one below.
should now look something like one below.
CALL TYPE
: AREA CALL
AREA :
34
°
N 140
°
W
↓
10
°
→
5
°
PRIORITY
: ROUTINE
COM. TYPE : TELEPHONE
COM. FREQ :
COM. FREQ :
2164.0 KHZ
DSC FREQ : 2M-INTL
GO TO ALL VIEW
**
Compose message
**
14. Press the [CALL] key to send the geographical area call (transmission time: about
seven seconds). The display shows "Geographical area call in progress!" while the call
is being sent.
is being sent.
AREA:
34
°
N 140
°
W
↓
10
°
→
5
°
Geographical area
call in progress!
call in progress!
TIME TO GO :
7S
DSC FREQ :
2M-INTL
TELEPHONE
2164.0 KHZ
ROUTINE
15. After the call is sent the radiotelephone screen appears. If you chose radiotelephone at
step 8, you can now communicate with the other party. For NBDP, do the following:
Sending message by NBDP Terminal Unit
1. The message “STATION ENTRY COMPLETED FROM DSC. Press any key to escape.”
appears on the NBDP’s display. Press any key on the NBDP Terminal Unit to erase the
message.
message.
2. Press the function key [F3] on the keyboard of the NBDP Terminal Unit to show the
Operate menu.
3. Choose “Call Station” and then press the [Enter] key.
4. “DSC” is selected; press the [Enter] key. “Connect” appears in reverse video.
5. Type and transmit your message.
6. When you have finished sending your message, press the [F10] key to disconnect the
4. “DSC” is selected; press the [Enter] key. “Connect” appears in reverse video.
5. Type and transmit your message.
6. When you have finished sending your message, press the [F10] key to disconnect the
line.
offered by Busse-Yachtshop.de email: info@busse-yachtshop.de