Motorola G24 Benutzerhandbuch
Chapter 3: AT Commands Reference
December 31, 2007
AT Commands Reference Manual
3-211
Operation of this command is flex dependent.
The following table shows the +TADIAG parameters.
Example
AT+TADIAG?
+TADIAG: 0,0
OK
AT+TADIAG?
+TADIAG: 75,0
OK
READY, Unsolicited Notification (UART Ready Indication)
The READY unsolicited notification is sent to the TE following radio power-up, when the UART
is ready for communication, as indicated by DSR line state. This unsolicited notification is flex
dependant.
is ready for communication, as indicated by DSR line state. This unsolicited notification is flex
dependant.
+MPSU, Motorola Physical Second Uart
This command defines the functionality of the second physical UART.
The command is a basic command.
This feature is active by default.
UART2 has only 4 standard RS232 physical lines for serial communications: Tx, Rx, CTS and
RTS.
RTS.
Command
Type
Syntax
Response/Action
Remarks
Read
AT+TADIAG?
+TADIAG:
<RF1_value>,<RF2_value>
OK
or:
+CME ERROR <error>
Table 3-138: +TADIAG Parameters
<Parameter>
Description
<RF1_value>
0-255 ADC value reading of primary antenna.
<RF2_value>
0-255 ADC value reading of secondary antenna.