Motorola G24 Benutzerhandbuch

Seite von 642
Chapter 3:  AT Commands Reference
 December  31, 2007
AT Commands Reference Manual
3-271
+ MFOTAIND, Send Unsolicited FOTA Indications Toward 
the DTE
When set, the module will send all the indications mentioned in 
.
By default, FOTA unsolicited information report is Disabled.
This command is a basic command.
In MUX mode, this AT command is allowed on DLC2 only.
The following table shows the +MFOTIND parameters.
Command 
Type
Syntax
Response/Action
Remarks
Set
AT+MFOTAIND=
<EN-ind>
OK
or:
+CME ERROR:<err>
The Set command 
enables/disables Unsolicited 
indications. See 
.
Read
AT+MFOTAIND?
+ MFOTAIND: 
< EN-ind >, 
OK
Returns <EN-ind> value.
Test
AT+FOTAIND=?
+ FOTAIND:
(list of  < EN-ind >s)
Unsolicited 
Report
+FOTAIND
+FOTAIND: <OMA 
state>, 
<FOTA-Indication>
OMA state and FOTA information 
reports during FOTA process.
Table 3-179: +MFOTAIND Parameters
<Parameter>
Description
<EN-ind>
0 - Disable FOTA unsolicited informational report.
1 - Enable FOTA unsolicited informational report.
The default value is 0.
Enables the Module to indicate the DTE with FOTA progress. Relevant to Non 
transparent mode.