Motorola G24 Benutzerhandbuch
![Motorola](https://files.manualsbrain.com/attachments/83de88ba2280e7232128e8931d7cbd2a38dcc654/common/fit/150/50/0293f422c4d32e7e0f777d5e11bc33c83ea5627f71ddf155374c02a23d9a/brand_logo.png)
UI (User Interface)
3-314
AT Commands Reference Manual
December 31, 2007
+CMER, Mobile Equipment Event Reporting
The following table shows the +CMER parameters.
Command
Type
Syntax
Response/Action
Remarks
Set
+CMER=[<mode>
[,<keyp>[,<disp>
[,<ind>[,<bfr>]]]]]
[,<ind>[,<bfr>]]]]]
OK
or:
+CME ERROR: <err>
The Set command
enables/disables an external
accessory to receive event
reports from the G24. In some
cases, this is used to track the
user activity for redisplay on
a vehicle system, or to per-
form accessory-specific menu
operations.
enables/disables an external
accessory to receive event
reports from the G24. In some
cases, this is used to track the
user activity for redisplay on
a vehicle system, or to per-
form accessory-specific menu
operations.
Read
+CMER?
+CMER:
<mode>,<keyp>,<disp>,<ind>,<bfr>
OK
or:
+CME ERROR: <err>
The Read command queries
the current settings for the
AT+CMER command.
the current settings for the
AT+CMER command.
Test
+CMER=?
+CMER: (list of supported
<mode>s),(list of supported
<keyp>s),(list of supported
<disp>s),(list of supported
<ind>s),(list of supported <bfr>s)
<keyp>s),(list of supported
<disp>s),(list of supported
<ind>s),(list of supported <bfr>s)
The Test command returns
the possible <mode>,
<keyp>, <disp>, <ind>, and
<bfr> values.
the possible <mode>,
<keyp>, <disp>, <ind>, and
<bfr> values.
Table 3-206: +CMER Parameters
<Parameter>
Description
<mode>
Controls the processing of unsolicited result codes specified within this command.
0
0
Buffer unsolicited result codes in G24
<keyp>
0
Do not report keypad events.
1
Display events reporting using result code +CKEV. Only keypad events that
are not caused by the +CKPD command are reported.
2
2
Keypad events reporting using result code +CKEV. All keypad events, includ-
ing those caused by the +CKPD command, are reported.
The default value is 0.
The default value is 0.
<disp>
0
No display of event reporting.
1
Display event reporting using result code
+CDEV: <x>,<y>,<text>,<highlighted>
<x> indicates the x coordinate of the text.
<y> indicates the y coordinate of the text.
<text> is the new value of the text element.
< highlighted> indicates whether the line has a backlight
The character set used in <text> is as specified by the Select TE Character Set
(+CSCS) command.
<x> indicates the x coordinate of the text.
<y> indicates the y coordinate of the text.
<text> is the new value of the text element.
< highlighted> indicates whether the line has a backlight
The character set used in <text> is as specified by the Select TE Character Set
(+CSCS) command.