Lucent Technologies Transtalk 9000 Benutzerhandbuch
2-26
Installing the MDW 9030P Pocketphone
Working from left to right, insert a radio module
into each slot of the control carrier, starting with
into each slot of the control carrier, starting with
Slot 1; hook each radio module onto a mounting rod.
Slowly swing the radio module's card edge into the
card edge connector on the back of the carrier.
Slowly swing the radio module's card edge into the
card edge connector on the back of the carrier.
IMPORTANT:
IMPORTANT:
IMPORTANT:
IMPORTANT:
IMPORTANT:
Slot 6 of a carrier that has another carrier to the
right of it must always contain a radio module
to pass the synchronization signal to the next
carrier.
right of it must always contain a radio module
to pass the synchronization signal to the next
carrier.
When the card edge is fully seated, a snap lock
on the bottom of the radio module will engage.
on the bottom of the radio module will engage.
11
12
Repeat Steps 10 and 11 for each expansion
carrier, until each radio module is inserted into
carrier, until each radio module is inserted into
a carrier.
NOTE:
NOTE:
NOTE:
NOTE:
NOTE:
Fill all six slots of the current carrier before
inserting radio modules into the next carrier.
Fill all six slots of the current carrier before
inserting radio modules into the next carrier.
Insert a telephone line cord into the bottom of
each radio module.
each radio module.
13
10