Panasonic MN101C77C Benutzerhandbuch

II - 31

Chapter 2   CPU Basics

ROM Correction

The ROM correction setup procedure is as follows.

(1) Set the head address of the program to be corrected to the ROM correction address setting

     register (RCnAPH/M/L).

(2) Set the correct program at RAM area.

(3)

 

Set the head address of the correct program to RC vector table (RCnV(L), RCnV(H)).

(4)

 

Set the RCnEN flag of ROM correction control register (RCCTR) to enable the ROM correction.

When the instruction of the corrected program  head address is the half-byte instruction, the

ROM correction checks the execution instruction of the half-byte. Therefore, set the address

by a byte to the ROM correction address setting register.

When the instruction of the corrected program last address is the half-byte instruction, the

recover address should be set by half byte.