Ricoh 106 Benutzerhandbuch
21
GETTING ACQUAINTED
2. GETTING
A
C
Q
U
AINTED
Upgrading Memory
You can install Single Inline Memory Module (SIMM) to upgrade the on-
board memory of the machine.
The machine is shipped from the factory with a 4MB SIMM, which can be
replaced with an 8MB, 16MB or 32MB SIMM.
Use the following procedure to install 8MB, 16MB or 32MB SIMM.
board memory of the machine.
The machine is shipped from the factory with a 4MB SIMM, which can be
replaced with an 8MB, 16MB or 32MB SIMM.
Use the following procedure to install 8MB, 16MB or 32MB SIMM.
Note
The following are the required specifications for a SIMM used with this machine:
72-pin, 60ns, Extend Date Out (EDO), parity/non-parity.
72-pin, 60ns, Extend Date Out (EDO), parity/non-parity.
Important!
Make sure you touch some grounded metal object with your hand to discharge any
electrostatic charge from your body before handling the SIMM.
electrostatic charge from your body before handling the SIMM.
1
Turn off the machine.
2
Remove the SIMM cover located on the
left side of the machine.
left side of the machine.
3
Pull apart the hooks on the both sides
of the SIMM board that hold it in place.
of the SIMM board that hold it in place.
SIMM