Ricoh 106 Benutzerhandbuch
56
TECHNICAL REFERENCE
02:0010 000
Selecting 300 dpi or 600 dpi
Set the printer to 300 dpi if the designated output is not obtained when
printing using a DOS application compatible with the 300 dpi PCL printer.
printing using a DOS application compatible with the 300 dpi PCL printer.
Prt Help List
O K
3 User param.
1
Press
. “Prt Help List” ap-
pears.
2
Press
or
until “3
User Param.” appears. The messages
change in the following order.
change in the following order.
1 Tray Pap. Size
3 User Param.
2 Language
3
Press
and press
to
move the flashing block cursor until it
appears in the position shown in the
illustration to the right.
appears in the position shown in the
illustration to the right.
Note
The bits other than the one highlighted in the
illustration are unrelated to this setting.
illustration are unrelated to this setting.
4
Press
to change the setting to 1 or
0, as desired.
Display
Heater status
02:0010 0000
600 dpi (default setting)
02:0010 1000
300 dpi